First Layer issues
I have an Ender 5, using multiple brands of PLA at a temperature determined by brand recommendations (190-210), bed surface at 50, starting speed at 20, and a .4 mm nozzle. When I start a print the first layer is always ruined by bloobs of extruded ...
GBVogeslang, 8 months ago
8 months ago
We’re a bunch of 3D printing and design nuts. We just want to make great 3D design available to everyone.
Good design takes time, great design takes a process. You can learn this with us, to build your skill set in this rapidly expanding market.