Share:
Share
Notifications
Clear all

Extruder selection

Page 2 / 2
peterb8f15b29
(@peterb8f15b29)
Famed Member

@lmf5000

Hi Luke, You were right. I have reset it to 3 as attached Screenshot but it still does not show the Purging Volume or wipe to infill.

Regards

Peter

Screenshot (237)
Screenshot (238)

 

ReplyQuote
Topic starter Posted : 10/09/2021 9:31 am
Luke
 Luke
(@lmf5000)
Expert Moderator

Hi Peter,

In my testing I discovered that you actually have to save the print profile before the wipe to infill appears - can you confirm the profile is saved? Try closing and opening PrusaSlicer as well. Lastly, check that the wipe tower is enabled, like so -

image

Let me know if that fixes it 🙂

 

Regards,
Luke

ReplyQuote
Posted : 10/09/2021 10:04 am
peterb8f15b29
(@peterb8f15b29)
Famed Member

@lmf5000

Well done Luke, that solved it. I had saved it but it did need the wipe tower enabled.

Next, how do I wipe to the infill. I can't see a place to do this.

Thanks and regards

Peter

ReplyQuote
Topic starter Posted : 10/09/2021 10:16 am
Luke
 Luke
(@lmf5000)
Expert Moderator

Hi Peter,

Do you see the "wipe options" menu when you right click the icon of the object under "editing" in the plater?

image
image

That's how I was able to get the tickbox to appear in the plater -

image

Let me know if that worked for you 🙂

 

Regards,
Luke

ReplyQuote
Posted : 12/09/2021 1:05 am
peterb8f15b29
(@peterb8f15b29)
Famed Member

@lmf5000

Hi Luke,

Yes, got it now. Thanks very much.

regards

Peter

ReplyQuote
Topic starter Posted : 12/09/2021 1:40 am
Luke
 Luke
(@lmf5000)
Expert Moderator

Hi Peter,

Glad it's resolved for now. Happy printing!

 

Regards,
Luke

ReplyQuote
Posted : 12/09/2021 7:47 pm
Page 2 / 2
Share:
Share

About us

We’re a bunch of 3D printing and design nuts. We just want to make great 3D design available to everyone. 

Our mission

Good design takes time, great design takes a process. You can learn this with us, to build your skill set in this rapidly expanding market. 

Learn with us:

© Copyright: 2019 io3dp.com
Close Menu